HDLethalCompany V1.5.1 - Sligili | CLIENT SIDE 🎈

From now on updates will be less frequent

INSTALLATION 🛠

Extract on the main game folder (where Lethal Company.exe is located). Make sure you have BepInEx installed

CONFIGURATION ⚙

Open BepInEx/config/HDLethalCompany.cfg with a text editor.

📃This mod maintains the vanilla rendering aspect ratio to avoid breaking any HUD elements.
Calculate the value equivalent to your desired resolution -> DesiredResolutionWidth/860

• RESOLUTION FIX: Set EnableRes to true or false - if false, disables my custom resolution method so you can add another resolution mod with a different solution like this one or any WideScreen fix

• RESOLUTION SCALE: Set value to any number between 1.000 (or lower) - 4.500 (The UI scanned elements have slightly incorrect offsets after 3.000)

  • 0.923 -> 800x480 (Increases performance)
  • 1.000 -> 860x520 (Vanilla resolution)
  • 1.488 -> 1280x720
  • 2.233 -> 1920x1080 (Default mod resolution)
  • 2.977 -> 2560x1440
  • 4.465 -> 3840x2060

• TEXTURE QUALITY: Set TextureQuality to any of the following values 0 1 2 3 - modifies texture resolution

  • 0 -> VERY LOW (Eight resolution)
  • 1 -> LOW (Quarter resolution)
  • 2 -> MEDIUM (Half resolution)
  • 3 -> HIGH (Full resolution - Vanilla and default mod value)

• VOLUMETRIC FOG QUALITY: Set FogQuality to any of the following values 0 1 2 3 - modifies the volumetric fog budget

  • 0 -> VERY LOW (Lower than the Vanilla preset, increases performance)
  • 1 -> LOW (Vanilla preset and the default mod value)
  • 2 -> MEDIUM
  • 3 -> HIGH (Can really impact performance at high resolutions)

• LEVEL OF DETAIL: Set LOD to any of the following values 0 1 2 - modifies the distance at which models decrease their poly count/disappear

  • 0 -> LOW (half distance)
  • 1 -> MEDIUM (Vanilla distance - Default mod value)
  • 2 -> HIGH (Twice the distance)

• SHADOW QUALITY: Set ShadowQuality to any of the following values 0 1 2 3 - modifies the maximum resolution they can reach

  • 0 -> VERY LOW (disables shadows)
  • 1 -> LOW (256 max resolution)
  • 2 -> MEDIUM (1024 max resolution)
  • 3 -> HIGH (2048 max resolution - Vanilla and default mod value)

• POST-PROCESSING: Set EnablePP to true or false - if false, disables the HDRP Custom Pass, therefore disabling color grading

• VOLUMETRIC FOG: Set EnableFOG to true or false - if false, disables the HDRP Volumetric Fog. Use this as a last resource in case lowering the fog quality is not enough to get decent performance

• ANTI-ALIASING: Set EnableAA to true or false - if true, enables built-in SMAA

• FOLIAGE TOGGLE: Set EnableF to true or false - if false, disables the "Foliage" layer (trees won't be affected, only most bushes and grass)

CHANGELOG 🕗

• v1.5.1:
  • Added a new parameter Foliage
  • Fog Quality won't be overridden by the weather system anymore
  • Fixed invisible stairs with LOD set to 0
  • Fixed some settings being reset after leaving a game and joining another
• v1.5.0:
  • Added a new parameter Resolution Fix
  • Now spectator camera gets all settings applied. Ship cameras only apply lower settings.
  • Removed LC_API dependency because of bugs
  • Tweaked the icon
• v1.4.1:
  • Mod has a GitHub now
  • New icon
• v1.4.0:
  • Added two new parameters Level Of Detail and Shadow Quality
  • LC_API now required
  • Texture Quality instructions now included
• v1.3.0:
  • The scanner should work now
  • Added a new parameter Texture Quality
  • Changes now apply to the spectator camera aswell
  • The DLL has been renamed
• v1.2.0:
  • SMAA actually works now (UwU)
  • Added a new parameter Fog Quality
  • Now the resolution scale multiplier value can go up to 4.500 without breaking the scanner (too much)
• v1.1.2:
  • Read Me formatting :P
• v1.1.1:
  • Fixed some typos