H3VR
Install with App

Details

Latest version
0.9.3
Last Updated
First Uploaded
Downloads
16
Likes
0
Size
19MB
Dependants

Mr.Zippy

Mr.Zippy climbing harness with Mr.Grippy, the MZ69 Grip and the VOG-69 Grip

Mr.Zippy is a climbing harness for H3VR. Clip onto a ladder to free up both hands, ride a zipline, or rappel off a roof. If there's nothing to clip onto, throw Mr.Grippy to make a climbing hold.

Current version: 0.9.3 (changelog)

Mr.Zippy

  1. Install the mod and its dependencies with r2modman or Thunderstore Mod Manager.
  2. In the item spawner, open Misc > Utility > Mr.Zippy. Equip the kit in your backpack slot. It comes with a field manual.
  3. Hold Trigger over the hook at the front of your belt. Move it over a ladder or climbing hold. When the hook turns blue, release Trigger to clip in. You can also throw the hook.

Locked holds the length you set. Unlocked lets the reel take in or pay out line as you move. The reel holds 30 metres by default. At full length it catches a fall. If you grab another climbable and pull yourself past that limit, the hook comes free.

The line wraps around walls and moving platforms. On a zipline, use the brake to stop the hook. You can still swing underneath it.

The Mr.Zippy carabiner clipped around a zipline above the climbing course

The kit has one Huge slot at the back and a Large slot on each side. Grab it at the backpack mount to take it off. Dropping the kit reels the hook back in.

Controls

Use an empty hand. For each directional shortcut, tilt the thumbstick in that direction and click it.

Where Input Action
Hook Hold Trigger, then release Pick up the hook. Release on a highlighted hold to attach, or let go mid-swing to throw it.
Line Grip Hold your hand steady on the line.
Line Grip + Trigger Pull toward yourself to climb. Push toward the anchor to pay out rope.
Belt point Grip Keep your hand on the controls while you move or look around.
Belt point Left or Right Left toggles the line lock. Right toggles the zipline brake.
Belt point or gripped line Up or hold Down Up retrieves the hook. Holding Down reverses the lock until you release the click.
Belt point Hold Grip + Trigger, then click the thumbstick Move the belt point with your hand. Release either button to save its position.
Planted Mr.Grippy Grip, then Down to remove Grip to climb. Click Down while gripping to pull it out.

Mr.Grippy

Throw Mr.Grippy into a wall and grab the handle to climb. Clip your hook through its eye before throwing to use it as a grappling hook. The line pays out until Grippy sticks, then goes back to your lock setting. It fits a Medium slot and can be spawn-locked.

The orange tether clipped through the eye of a Mr.Grippy planted in a wall

MZ69 Grip / VOG-69 Grip

The MZ69 Grip fits the M203. The VOG-69 Grip fits GP launchers. Both fire a permanent climbing hold. To take your line with it, clip the carabiner to the round before loading. Find both rounds in the ammo panel or under Mr.Zippy's related items.

MZ69 Grip clipped to the tether on a rooftop, alongside a VOG-69 Grip and its GP launcher

Mod options

After the first launch, open BepInEx/config/quaternion.MrZippy.cfg to change the rope length, haul speed, swing damping or hook pickup radius. This is also where Mr.Zippy saves the belt position you set in VR.

Held Gun Wall Reaction lets you push off a wall with a held gun while hanging. Supported locomotion modes are TwinStick, Armswinger and SingleTwoAxis.

Changelog

  • 0.9.3 (current) The rope wraps around scenery and skips loose equipment. The kit spawns with its manual. Find it in the spawner as Mr.Zippy.
  • 0.9.2 Updated the field manual artwork and turned the side slots muzzle-down.
  • 0.9.1 Set the default rope length to 30 m, simplified hauling and fixed the belt lock indicator.
  • 0.9.0 Added rope wrapping, belt collisions and both support rounds in the ammo panel.
  • 0.8.x Updated the support round models, laser pickup and line controls.
  • 0.7.x Added grappling with Mr.Grippy, launcher-fired supports and thumbstick controls on the belt.
  • 0.6.x and earlier Added the harness, throwable hook, zipline brake, storage slots and Mr.Grippy.

Full version history

Feedback

For feedback or support, join the H3VR Homebrew Discord server and look for @quaternion. When reporting an issue, include your BepInEx log, mod list and steps to reproduce it. For movement issues, include your locomotion mode, controller type and any changed harness settings.

Credits

  • Anton Hand and RUST LTD. for H3VR.
  • The H3VR Homebrew community, and the maintainers of BepInEx, Harmony, MeatKit and Sodalite.
  • Rudmer_Rotteveel for Karabiner_Click_04 and Karabiner_Click_01, and CapsLok for Tools Ratchet, under CC0 1.0. Recordings are excerpted and processed for playback.
  • Benboncan for Hand Winch Quick Release.wav, under CC BY 4.0. Adapted through trimming, mono conversion, level changes and layering for the breakaway cue. No endorsement is implied.
  • Ovani Sound for licensed recorded foley used in the rope and Mr.Grippy mechanism sounds. These recordings are embedded game assets and are not included under an open-source license.

The package includes THIRD-PARTY-NOTICES.md with the full asset and license details.

Support

Tips and donations are welcome on Ko-fi. You can find my other projects and links at quaternion7.github.io.

Disclosure

I use AI and LLMs to help speed up development. I have a full-time job, and these tools make it practical to keep building and maintaining mods in my spare time.

My background in game development predates today's AI tools, and I have the skills to do this work without them. I choose to use them because they save time and let me focus more on gameplay, hands-on setup, testing, and polish. The design decisions, review, and responsibility for the finished mod remain mine.

Thunderstore development is made possible with ads. Please consider making an exception to your adblock.