
FPVRC
FPVRC by Clover: drive an FPV RC car in ReSkate with from-scratch physics. Build race tracks with gates, laps and best times, frame gates with props, share cars, see friends' cars in lobbies. Surface radio support.FPVRC by Clover
Drive an FPV RC car around any ReSkate map with physics that behave like the real thing, then race it: build your own tracks, time laps and keep your best.
Your skater stays put and the camera rides a from-scratch RC car: a rigid body, four-wheel suspension and real tyre grip. On the ground it drives like a hobby-grade buggy. In the air it does what RC cars actually do: throttle backflips the car, brake front-flips it, bigger wheels flip harder. Made for a surface radio (RadioMaster MT12); keyboard and gamepad work too.
Beta: it is being tuned, and your bug logs are how it gets better. Made by Clover FPV Systems.
Features
- Real RC physics. Spring-damper suspension, a tyre friction circle with grip falloff, per-wheel drivetrain with three diffs (open to locked), ESC modes, drag brake, and engine/motor WAV sound synthesis (
brushed,brushless,center_gear). Proper air behaviour: spinning wheels act as a rotor, throttle and brake pitch the car, steering rolls it, and an onboard Hydraulic Turtle Piston fires on press to flip back onto your wheels (long-hold respawns at checkpoint/skater). - Freecam Course Editor & Joker Laps. Press Shift+T (or Edit Course on the RACE tab) to fly with controller (
LStick+R2/L2) or keyboard (WASD+EQ) and build circuits or point-to-point courses:- L3 / F snaps to the gate under your crosshair; DPad Up/Down (
Tab) cycles gates; DPad Left/Right adjusts width; Tri moves; Sq / Del deletes. - L1 / R1 turns yaw; Hold L1 or R1 + DPad raises/lowers gates (supports mid-air gates and plunging posts below ground) and tilts forward/backward (L1+R1 or
0levels upright). - R3 cycles Insert Before / After / Add Joker Gate; highlight any downstream gate (#2+, FINISH, or START / FINISH) and press Cross / Options / K / 4 to designate End of Joker, with configurable Joker miss penalty (
+30sdefault).
- L3 / F snaps to the gate under your crosshair; DPad Up/Down (
- Gate props & starter course. Default StreetLight side posts (or Arch/custom props sampled near you) frame each gate; includes the built-in
top to bottom 1starter course and one-line track sharing (RCTRACK1). - Clean HUD. Scaled Arcade and Classic HUD modes; the top-middle race timer only appears during an active run or post-race result banner.
- Cars, presets & sharing. Buggy, Stadium 8, Rally, Trophy, and Crawler presets. Tune anything on the BUILD and TUNE tabs, save cars, duplicate, rename, undo deletes, recover unsaved edits, or share with
rc export/rc import(RCCAR1). - Pause while you type. The car freezes whenever the console or ReSkate menu opens, the race clock pauses cleanly, and the screen reads PAUSED.
- Surface radio & DualSense support. Guided controller setup (
CONTROLLERtab), device picker, reset control, gamepad/DualSense aliases, and bindable hotkeys. - Built for multiplayer lobbies. Simulated client-side with raycasts; other mod users see your RC-car marker/distance/off-screen arrow and RC CAR nametag (plus optional scaled map-car proxy
beaconcar).
Quick start
- Press INSERT → RC Car → DRIVE tab → START DRIVING (or type
rc drivein the console).rc parkstops. - First time: CONTROLLER tab → SET UP CONTROLLER. Keyboard fallback: W / S to drive, A / D to steer.
- Pick a car on the CAR PRESETS card. Teleport me to the car brings your skater to it.
Racing
The race module is switched on with rc race on (it is off by default).
1. Make a track. Pick one kind:
rc race circuit <name>: a loop. Gate 1 is the start and the finish, you drive laps (3 by default,rc race laps <n>, 0 = a free run).rc race p2p <name>: point to point. A start, gates, and a separate finish gate.
2. Place gates while you drive. The keys can be changed on ReSkate's Binds page.
| Key | What it does |
|---|---|
| Shift+G | First press: shows the gate at the car and pulls the camera back. Press again to place it. |
| Shift+H | The same for the finish gate (point to point only). |
| Shift+U | Cancel the preview, or undo the last gate. |
| Shift+C (twice) | Clear all gates on the track. |
| Shift+N / Shift+B | While placing: next / previous gate prop. |
| Shift+E | End a run. |
A gate faces the way the car faces when you place it, and only counts when you drive through it that way. rc race width <m> sets how wide new gates are (5 m by default).
3. Run. Drive through gate 1 to start the clock. Each gate shows your split and how far ahead or behind your best you are. The last lap of a set-length circuit shows the race total and your best lap, and the finished time fades from the top of the screen. Your best time (with the name that set it) and your own best are kept per track.
Managing tracks: rc race tracks, rc race track <name>, rc race delete <name>, rc race resetbest. rc race help lists everything. Editing a track's gates clears its best times, since they belong to that layout.
Framing gates with props
Gates can stand between two game props, with a green beacon (10 ft) straight up from each. The props are solid.
rc race props World/Props/Common/Construction/ 4 conelists the props that are loaded near you, measured and size-capped (4 m here). Nothing is spawned while it searches. A prop only appears while it is loaded, so run it near the props you want.rc race frame galleryputs a numbered row of the results in front of you.rc race frame try <n>shows one.- While placing a gate (Shift+G), Shift+N / Shift+B cycles the props live at the ghost gate. Placing keeps the one on show for the whole track.
rc race frame offremoves them.
Multiplayer
Drive in a lobby with a friend who also has the mod. While you drive, they see where your car is (icon, your name, distance, and an arrow at the screen edge when it is off screen) and your nametag changes to RC CAR. The car itself is not drawn in the world for them. Turn it off on DRIVE tab → MULTIPLAYER.
Installing
- Mod manager / launcher: install FPVRC from Thunderstore as you would any ReSkate mod.
- Manually: unzip so you have
<your ReSkate folder>\Mods\CloverFPV-RC_Car\containingmanifest.json,reskate-plugin.json,plugin, andsounds. - If the mod does not load, close ReSkate, set
"plugin_developer_mode": trueinReSkate.settings.json, and start the game again. - Check
logs\ReSkate.logforPlugin CloverFPV-RC_Car loaded. If you see[ERROR]lines that mentionCloverFPV-RC_Car, send me the log. - The mod asks for permissions (including
net.sessionandworld.entitiesfor the lobby marker and gate props). Fully restart ReSkate once after installing or updating so they are granted.
Sending me a bug log (please do this)
Right after something feels wrong (a snag at the bottom of a ramp, a slowdown, a weird bounce, a shove off a wall):
- Press F9, or DRIVE → SEND ME YOUR LOG → SAVE LAST 30 s LOG, or type
rc report what happened. - It saves the last 30 seconds of car data to
rc-log-<date>-<time>.txtand opens the folder (<your ReSkate folder>\Mods\.reskate_plugin_data\CloverFPV-RC_Car\). Send me that file. F8 drops a mark in the log while you keep driving. - The file holds car data and settings only, nothing personal.
If it says the files permission is not active, fully restart ReSkate and try again. If no file shows up, send logs\ReSkate.log (the rc- lines are the car data).
Console
rc lists everything. Common: rc drive, rc park, rc preset <name>, rc set <name> <value>, rc list, rc export [name], rc import <line>, rc report [note], rc mark [note], rc cal, rc status, rc race help.
Troubleshooting
- Menu or car stops working:
plugin reload CloverFPV-RC_Carin the console, or restart ReSkate, and send me the log. - A gate prop does not show: props only exist where they are loaded. Stand near them and run the search again. A track that names a prop your game does not have still works with the gate markers alone.
- Saved cars from an older version: the first run sets their chassis friction to 0.2.
rc preset buggyreloads the default buggy. - DEV tab: experimental physics switches. Leave them as they come, since those are the tested settings.
Credits
Built by Clover FPV Systems. Thanks to the ReSkate team for the plugin platform, and to everyone who sends logs and helps test.