ReSkate
Install with App

Details

Latest version
1.1.9
Last Updated
First Uploaded
Downloads
4.3K
Likes
1
Size
260KB
Dependants

1.1.9 — Settings wording and preset compatibility

  • Use uppercase tabs/sections, sentence case controls and concise descriptions. Remove card subtitles and filler notes while retaining all existing controls.
  • CROUCH: Follow crouching / Crouch follow strength. Orbit / Shoulder uses Camera type. Preset controls and other camera sections use shorter wording.
  • Preserve valid older preset values instead of clamping them to narrower menu edit ranges. Camera safety validation still rejects invalid values individually; missing fields use current defaults.
  • Existing S3Cam keys, camera behavior and defaults are unchanged. The scoped preset-loading adjustment was explicitly approved.
  • Regression includes actual older presets, per-field invalid-data checks, and comparison of every menu control's ID, value, limits and format against 1.1.8.
  • Separate versioned ZIP updates the existing installation folder without bundling saved settings or presets. Gameplay/menu verification is pending with the user.

1.1.8 — Downhill grind visibility

  • Grinds no longer inherit downhill terrain lift, slope-look tilt or quarter-pipe heading hold/swing from a nearby bank. The heading follows rail travel even when a nose/crook pose faces across it.
  • Keep forward visibility when collision must raise the grind camera: limit automatic downward aim to 25 degrees plus the player's existing grind pitch adjustment. Camera collision protection remains active.
  • Preserve saved settings, grind framing controls, crouch follow, marker-return recenter/fade and controller defaults. Ordinary riding, manuals and airborne terrain response are retained.
  • Offline regression includes multiple grind states, board offsets, slopes, Low/High, 30/60/144 FPS and steep-ramp entry/exit. Gameplay testing is pending.
  • Separate versioned ZIP updates the same installation folder and contains no saved settings or nested archives.

1.1.7 — Marker return and controller defaults

  • Marker/teleport returns clear rider velocity history, camera trackers, transition blends and the snap guard together. Short returns no longer count as fast riding; on-foot returns also reset the orbit.
  • Long returns of at least 8 m get a brief black cover and 0.25 s fade back. This uses the overlay permission, with no gameplay input capture or native teleport requests.
  • Shoulder switch defaults to L3; High low switch defaults to R3. Direct stick clicks work without recording binds; duplicate action/pad events are combined. R3 retains on-foot recenter/double-click Orbit / Shoulder.
  • Verbose reports add terrain lift, air rise, view pitch, collision pull and render carry to help diagnose jitter and steep grind views. Grind tuning is unchanged pending that analysis being reviewed.
  • User confirmed 1.1.6 crouch Off works; that implementation and saved settings are retained. Same installation folder, separate patch ZIP. Offline verification is recorded alongside the package; gameplay testing of 1.1.7 is pending.

1.1.6 — Ground-relative body follow Off

  • Replace trick-state-only compensation with ground-relative framing. Off/0% suppresses grounded body lowering and rising, including animation before state 103.
  • Retain the neutral body-to-ground reference through jumps and missing ground samples so compressed landings do not redefine it. Airborne correction still eases out.
  • 100% retains the original behavior. Saved toggle/slider values and the existing installation folder remain unchanged.
  • Logs identify the build and include body height, neutral height and framing correction in verbose reports. Offline validation is recorded alongside the ZIP; gameplay testing is pending.

1.1.5 — Crouch follow delivery

  • Includes the approved crouch body follow toggle and 0–100% amount from the internal 1.1.4 test build.
  • Correctly projects steep-ramp ground samples beneath the rider, including between physics updates, so slope-normal rays do not look like body lowering.
  • Same installation folder, saved settings and presets; no nested archives. Gameplay validation of the new controls is pending.

1.1.4 — Crouch body follow

  • New CAMERA controls: Crouch body follow and Follow amount (0–100%). 100% preserves the existing camera; 0% or Off keeps framing level with the surface during trick setup.
  • The correction follows grounded crouch body lowering, including standing back up, with smooth setting changes and release on takeoff or loss of ground data.
  • Actual movement, trajectory prediction, landing strength and collision body inputs are retained. The camera still respects walls and floor clearance.
  • Old settings and presets retain their values and default to 100%. Patch ZIPs update the same installation folder without moving settings or presets.
  • Offline regression and strict parity checks passed. The new feature still needs gameplay testing.

1.1.3 — In-place patch packaging

  • Each patch is a separate versioned ZIP containing the existing installation folder. Import and replace to retain saved camera settings and presets.
  • No folder renaming, bundled settings, or nested ZIPs. Camera behavior is unchanged.
  • The long Controls-page prefix belongs to the game UI and remains when retaining the existing folder ID.

1.1.2 — Short bind labels

  • Controls labels: Toggle mod, Shoulder switch, Offboard view. High/Low remains on R3.
  • Distributed as DC.zip: use the short installed folder name DC so the game's plugin prefix does not hide the action.
  • Camera behavior is unchanged from 1.1.1, which the user tested successfully on ReSkate 2.1.3.

1.1.1 — ReSkate 2.1.3 compatibility test 1

  • Read deck rotations in ReSkate 2.1.3's numeric quaternion format. The camera can now use the deck's pitch instead of always falling back to the feet.
  • Keep the foot-joint fallback when deck rotation is missing or invalid, and retain named-field quaternion compatibility.
  • Existing camera tuning, controls and preset keys are unchanged. Offline validation passed; gameplay testing is pending.

1.1.0

1.1.0 release

  • The built-in preset is now "Default", the tuned baseline: a fresh install starts from it and "Reset to defaults" goes back to it. The "Skate 3" and "Close & low" built-ins are gone (presets you saved yourself are kept).
  • Released on Thunderstore. Settings and presets live in the plugin's data folder, which follows the plugin's folder name: presets from a test build can be copied into the new presets folder ("Open preset folder"). Plugin test build 14
  • The landing shake no longer fades when the camera is pulled back after a big air. Before, a landing with the camera 2.8 to 3.4 m from you shook less, and beyond 3.4 m not at all, so the highest landings could shake the least. The landing shake is now as strong at any camera distance; the speed rumble still fades with distance.
  • A fast screen rattle on landing: the view shudders by a few degrees (pitch most, then roll and yaw) in a jolt that dies away in about 0.2 s. It turns the view only and never moves the camera, the snap guard leaves it alone, and it is the same at any frame rate. It scales with how hard you landed and with Landing shake strength (about 0.9 degrees of pitch at the default 3, 3 degrees at 10), and it is off with Camera shake off and while you bail. A second landing during a rattle takes over only if it is at least as strong. Plugin test build 13
  • Landings now hit. The camera drops on impact within a frame or two and eases back up, like the best landings in Dynamic Camera 1.0.2: a hard landing takes it down by about 0.3 m, the view pitches up with the drop, there is one small rebound, and it is settled in about a third of a second. The bounce is the same at any frame rate, and the snap guard leaves it alone.
  • Landing bounce is on by default now (LANDING BOUNCE card, CAMERA EFFECTS tab). Bounce depth (default 0.32 m) is how far a full landing drops the camera; Bounce recovery (default 0.18 s, was Bounce duration) is how long it takes to ease back up. A preset or profile saved with the older values keeps them: an old Bounce duration of 0.12 s is now a recovery of 0.12 s, so tweak it if it feels too quick.
  • The landing shake is 1.0.2's, as in build 11, and plays on top of the bounce. A second landing during a bounce starts from where the camera is: it never jumps up. Plugin test build 12
  • Stepping off the board after the Low camera no longer leaves the view looking up: the off-board camera levels out to its normal angle on its own, smoothly (the pull fades in and slows as it arrives). Tilting the view with the right stick stops it. Plugin test build 11
  • The landing is back to Dynamic Camera 1.0.2's. After a drop the camera sinks and jolts with the landing, as it did in 1.0.2: nothing holds the camera, its angle or the keep-in-frame view still for the kick any more (the quarter-second holds of builds 2 and 9 are gone), and the landing kick is the 1.0.2 kick again. It is read from the same looping shake pattern as the speed rumble, at the point the rumble has reached, instead of starting at one fixed point with a fade-in as in build 10.
  • The landing bounce is off by default. Turn it on with Landing bounce on the LANDING BOUNCE card (CAMERA EFFECTS tab). Presets and profiles that were saved with it on keep it on. The bounce dips the camera as 1.0.2's Native+ bounce did: a full landing at the default depth of 0.12 m dips it about 0.09 m (build 10 dipped it the whole 0.12 m).
  • The shake still never moves the camera toward or away from you (from build 10): the landing kick has no push along the view axis, and whatever is left of the shake along the line to you is taken out.
  • With dyncam_log 1, a landing of 0.4 m or more writes the 20 frames before the touchdown, the touchdown and the 40 frames after it to diag/camera_log.txt, one line per frame (camera height over you, view angle, field of view, shake, bounce).
  • Builds 8 and 10 are included: the Orbit / Shoulder switch off the board, and a manual's close-up ending when the board has lain level. Plugin test build 10
  • Landing bounce in the Full style: at a hard landing the camera dips straight down and springs back, while it keeps aiming at the same point, so the view dips with it. It never moves toward you (its distance to you along the ground is unchanged) and it never goes below the camera's ground clearance. How far it dips follows how hard you landed (a full landing dips the set depth, 0.12 m by default), and it plays inside the quarter-second landing hold. New LANDING BOUNCE card on the CAMERA EFFECTS tab, under CAMERA SHAKE: Landing bounce (on/off), Bounce depth (0 to 2 m) and Bounce duration (0.02 to 2 s). The presets already carried these values (S3Cam.NativePlus.LandingDip, DipDepth and DipPeakTime).
  • Every landing kick is the same now. The kick used to start wherever the speed rumble happened to be in its loop, so one landing pitched the view down, the next up, and another moved the camera sideways first. Each kick now starts at the same point: the view pitches down first, then settles. It is as strong as before on average. The speed rumble keeps its own pace while a kick plays.
  • The shake never moves the camera toward or away from you (a strong landing kick had moved it 4 to 8 cm along the line to you; now under 1 cm). It still moves it sideways and up.
  • A manual's close-up ends when the board is level: once the manual has run for half a second, a board within 4 degrees of level for 0.4 s in a row ends it. Before, the close-up lasted until the game wrote the manual's landing note, which it does only when the whole trick line ends, so it could hang on until your next ollie. A manual that goes straight into an ollie still ends when you leave the ground. If the board's tilt cannot be read, nothing changes.
  • Builds 8 and 9 are included (the Orbit / Shoulder switch, the quarter-second hold after a landing). Plugin test build 9
  • After a landing the camera now holds still for a quarter of a second before it settles, so the landing kick shows. Before, the camera was still coming down from its air height right after a drop (it sank by about 0.8 m and its angle swung by about 17 degrees in the next three quarters of a second), which hid the kick. Its height over you and its angle now stay where the touchdown left them for the kick and then ease down as before; the kick is as strong as it was. Landings on ramps and transitions, onto a grind and into a manual are not held. Build 8's view switch is included. Plugin test build 8
  • Off the board, double-click R3 to switch between the Orbit and Shoulder views (one click still swings the camera behind you). A new bind does the same: "switch off-board view" (Ctrl+Shift+V) on Settings > Binds > PLUGINS. The camera eases to the other view.
  • Orbit and Shoulder each keep their own sliders (distance, height, look height, offset, FOV, turn smoothing, recentre time): switching back gives you your own values again, also after a restart. The Style choice on the OFF THE BOARD tab works the same way. Plugin test build 7
  • Manuals (and nose manuals) now come from the game's trick list as they start: the close-up begins when the manual is named and ends with its landing note, or when you leave the ground, grind, get off the board or start another trick. Reverts and powerslides no longer give the close-up (the game's skate state 101 is theirs, not the manual's). A manual named in the air, straight out of a flip trick, starts as soon as you roll. Repeated notes (the music ticker, landing notes that come again) are ignored. Plugin test build 6
  • No more snaps: every view the plugin is about to show passes a last check. If the camera's offset from you changes by more than 0.25 m in a frame, the view turns more than 8 degrees in a frame, or the field of view moves more than 2 degrees in a frame, the view eases from what is on screen to the new one over about a third of a second instead of jumping. Walls pushing the camera in, and teleports, are not smoothed. The camera log counts the smoothed jumps by cause and by which camera path made them ("N snaps smoothed" on the "off" line, one line for each in verbose logs).
  • Getting back on the board no longer snaps the view: the first frame after a remount used to lose the camera's up and down angle and turn 20 to 25 degrees at once.
  • Standing or walking slowly on foot is no longer taken for a pause of the game. It handed the camera back and took it again over and over, each time with a jump. Only missing game updates, or, on the board at speed, a root that stands still, mean a pause now.
  • The game's field of view is only used as the camera's base when it is a normal one (50 to 100 degrees). A zoomed or menu screen reporting 28 degrees made the take zoom in.
  • A retake after a short release (a menu, a pause) starts from the view that was last shown when the game's camera does not look like a normal one.
  • Manuals now come from the game's skate state (101, which the game reports while you hold a manual): on after 0.06 s in it, off after 0.15 s out of it, so landing into a manual, a manual after a flip trick, and a manual right after another all get the close-up on time. The trick list no longer starts or ends a manual; with dyncam_log 1 it writes each trick name with the state it came at. Plugin test build 5
  • Off the board: the camera no longer switches off when you step off the board. It keeps the view while you walk, stand, run, bail and land a hippy jump on foot, and you look around with the right stick. Board to foot and foot to board are blended (sine ease), so there are no cuts.
  • New tab OFF THE BOARD: Off-board camera (Dynamic or Game), Style (Orbit or Shoulder, the Arkham-style walk), Distance, Height, Look height, Horizontal offset, Field of view, Follow smoothing, Turn smoothing, Stick speed, Invert Y, Recentre after, Match walking to the view, Level with the body, Bobbing strength, Bail distance, Board / foot transition time. Everything eases; nothing snaps.
  • The camera swings behind you after a while of walking without touching the right stick (standing still never recentres). R3 on foot swings it behind you at once, eased.
  • "Match walking to the view" slowly turns the view toward the direction the left stick walks "forward", so the stick and the screen agree. The game steers walking with its own hidden camera, which the plugin cannot read; it estimates it from how you walk.
  • Bails off the board are framed whole (head and hips), further out, with a slower recentre.
  • Walls and the ground are handled by a spring arm: the camera slides in fast and comes back slowly, and is lifted instead of going under the ground.
  • Choosing Game for Off-board camera gives the old behaviour (the eased hand-back to the game's camera). Menus, pause and having no skater still hand the camera back at once; switching the camera off on foot eases out.
  • The mouse does not turn the view on foot (the plugin API's mouse look needs the right mouse button and moves the cursor).
  • Old settings and presets load unchanged; the new values are saved as S3Cam.OffBoard.*. Plugin test build 4
  • Binds: "camera on / off" (Ctrl+Shift+D) and "switch shoulder side" (Ctrl+Shift+S) now appear on Settings > Binds under PLUGINS; the keys can be changed or cleared there.
  • Manuals: the board's pitch is read from the angle between the feet when the game gives no deck pose, so manuals are detected and the close-up has a board centre to aim at. The log says which source is used and how many manuals were seen.
  • Stepping off the board (or finishing a hippy jump) eases the camera to where the game's own camera will be before handing it back. "Hand-back blend time" on the ADVANCED tab sets how long (0 hands back at once). Plugin test build 3
  • Loading: the modules load one per tick instead of all at once, so the plugin starts within the game's 50 ms limit. Plugin test build 2
  • Landing shake after big airs: the view holds still for a moment at touchdown so the landing kick shows. Not on ramps and steep slopes. Plugin test build 1
  • First release as a ReSkate plugin (no DLL needed): the Dynamic Camera 1.0.2 camera ported to the plugin API.
  • Same camera, settings, labels, presets (same JSON and S3Cam.* keys) and console commands (dyncam, dyncam_, s3cam_ aliases).
  • Menu page under PLUGINS with the same tabs; presets are managed from a window (save, load, rename, delete, import a file).
  • Camera logging writes files to the data folder.
  • Not included: the Native+ style.
Thunderstore development is made possible with ads. Please consider making an exception to your adblock.