DvergrSkyTram
Beta. Cable airships between depots and pylons. Heavy rigs are flying bases. Base Power berths four of them. Nodes show a power readout.Report a bug or buy us a coffee at dfgaming.net.
Still in beta. Please report any bugs you find.
Dvergr Sky-Tram
Build a depot, raise a pylon, and string a cable between them. An airship rides that line from one dock to the next, carrying you and a hold of fuel.
A Valheim BepInEx 5 plugin built on Jotunn. Requires DFGHub for the shared board.
Features
- A depot and a pylon, joined by a cable the airship actually follows.
- Two hulls. The larger one is the default build. The smaller one is the other option.
- A four-berth quay, so several airships can sit at one dock.
- Board the ship, fuel it from its own hold, and send it to a connected dock.
- Store an airship and place it again at any depot that has a free berth.
- Name depots and ships. Their status is on the DFG board.
- A local page for the quay's landing spots, including which way each berth faces, and for sliding each power antenna.
- A power readout above a nearby depot, quay, pylon, relay or Base Power.
Requirements
- BepInExPack Valheim
- Jotunn (2.30.x)
- DFGHub
- Valheim 1.0.16+
Installation
- Install through your mod manager (recommended).
- Manual: place
DvergrSkyTram.dlland the.glbfiles beside it intoBepInEx\plugins\DvergrSkyTram\.
How to Use
- Build Dvergr Tram Depot, Dvergr Tram Pylon, and Dvergr Sky-Tram Quay from the Hammer, in the DFG category.
- Press E on a depot or pylon and connect a cable. The ship will not leave until the docks can see each other through that line.
- From the depot panel, build an airship. It parks on the pad.
- Press E on the depot or the airship for Board, Fuel, Store, and sending it on.
- While the game is running, open http://127.0.0.1:8792/ to move and turn the four quay landing spots. The same page slides the power antenna on each machine. Save keeps the landing spots for the next launch. Antenna moves are saved as you make them.
- Look at a hearth, furnace, spindle, dynamo, turbine or capacitor and hold Alt. The arrow keys slide its antenna, and Page Up and Page Down raise it.
Configuration
BepInEx/config/com.dfg.dvergarskytram.cfg
[4 - Models]scale and facing,DockPadsfor the saved landing spots, andMastHearthX(and the same for Furnace, Spindle, Dynamo, Turbine, Cell) for each antenna[4 - Models]WebPort(default 8792) for the tuning page[8 - Power]PowerMonitorandPowerMonitorRangefor the readout above a node[8 - Power]CoalPerMin,TarPerMinandGeothermalPerMinfor the three heavier generators.GeyserPrefabsnames the vent a geothermal generator has to stand on, defaultfire_hole.[1 - General]FreeBuildplaces Hammer pieces with no material cost. Off by default. Reload the world after changing it.[4 - Models]PowerElevatorPartnames the Base Power slab the elevator replaces. Defaulttripo_part_8.
Support
If this mod has made your journey through the Tenth World a little better, consider tossing a coin into my Ko-fi jar: https://ko-fi.com/draugrforgedgaming. Your support keeps the forge hot and the mead flowing! Skål!
